STK-1548

• Single Rotating Spindle
• 18 metres In- Feed Rollers
• 12 metres Out- Feed Rollers
• Pincher Unit Feed
• Cross Transfers
• Outfeed Cross Transfers
• 750mm Capacity

STK- 1598 

• 3 Spindle Drilling
• 18 metres  In  Feed
• 18 metres Out Feed
• Gripper Feed
• Automatic Toolchanger on 3 spindles
• In Feed Outfeed Cross Transfers
• 1 metre Capacity

STK 1572

• Three Spindle
• 15 metres In-Feed Rollers
• 12 metres Out- Feed Rollers
• In-Feed Cross Transfers
• Out Feed Cross Transfers
• 600mm Section Capacity

STK 1631

• 3 Spindles
• 5 station Automatic Toolchanger per spindle
• 14 metres Infeed
• 14 metres outfeed
• Gripper Unit Feed.
• 1 metre Capacity
• Hard Stamping

STK 1621

• Three Spindle
• 18 metres In-Feed
• 13.5 metres Out-Feed
• Pusher Unit Feed
• In-Feed Cross Transfers
• Out-Feed Cross Transfers
• 750mm Section Capacity

STK 1638

• Three Spindle
• Automatic Tool changer
• 24 metres In-Feed
• 18 metres Out-Feed
• Roller Feed
• Hard Stamper
• In-Feed Cross Transfers
• Out-Feed Cross Transfers 
• 1000mm Section Capacity

STK 1639

• Rotating Spindle
• Automatic Tool changer
• 24 metres In-Feed
• 18 metres Out-Feed
• Roller Feed
• In-Feed Cross Transfers
• Out-Feed Cross Transfers 
• 1000mm Section Capacity

STK 1640

• Three Spindle
• 18 metres In-Feed
• 13.5 metres Out-Feed
• Gripper Feed
• In-Feed Cross Transfers
• Out-Feed Cross Transfers
• 600mm Section Capacity

STK-1612 

• 18 metres Section Capacity
• 980mm Section Height
• Single Spindle Drilling
• Hydraulic Hold‐down units Drill Coolant System Quick Change Drill Spindle

STK-1613 

• 15 metres Section Capacity
• 980mm Section Height. Single Spindle Drilling
• Hydraulic Hold‐down units Drill Coolant System Quick Change Drill Spindle

STK- 1587

• 14 metres Section Capacity
• 1000mm Section Height
• Single Spindle Drilling
• Hydraulic Hold‐down units Drill Coolant System Quick Change Drill Spindle

STK – 1579

• 18 metres In-feed Rollers
• 15 metres Out-feed Rollers
• Infeed Cross Transfers
• Outfeed Cross Transfers
• Rotating Single Spindle. Automatic Tool Changer
• 4 way Scribing

STK -1630

• 3 spindles
• Manual tool change
• 12.5 Metres infeed
• 12.5 Metres outfeed
• Infeed and Outfeed Crosstransfers. 600mm Capacity Drilling diameter 6 – 31.75 mm

STK-1493

• 3 Spindle
• 25 Metres of In‐feed rollers
• 25 Metres of Out‐Feed Rollers
• 1.25 metres Sections
• Roller Feed measuring
• Cross Transfers

STK-1549

• Coping Robot
• 18 Metres In‐Feed Rollers
• 18 Metres Out‐Feed Rollers
• Roller Feed
• Kjellberg Smart Focus 300A Plasma Unit
• Donaldson Extraction System
• 1.25 metres Sections

STK 1614

• Cutting Capacities 400mm Diameter
• 700mm x 400mm Rectangle
• Mitre 45 degrees 600 x 400
• 45 & 60 Degree Mitres

STK 1615

• Capacities: Capacity 360 mm diameter , 
• Rectangular 704 x 360 mm @ 90 degrees or 340 mm diameter , 
• Rectangular 400 mm x 340 mm @45 degrees.
• Input 415/3/50 4kw approx. Speeds 20-120 meters per min
• Swivel frame 0-45 degrees. Vice opens 710 mm. Measuring Head
• Infeed  / Outfeed powered rollers. Infeed / Outfeed  Cross transfers

STK 1641

• 510mm Diameter, 450 mm Square, 450 x 750mm Rectangle
• Mitres 45 degrees both ways
• Blade rotation, Blade Cleaning motorized brush, Motorised workpiece clamping, Cutting angle display, workpiece self-centring

STK JV 1

• Capacity 1300 x 1300mm
• Power 230 V – 50/60 hz / 400 v – 50hz / 460 v 60hz
• Blade drive 11 kw
• Hydraulic drive 3.7 kw
• Coolant drive 0.4 kw
• Wire brush drive 0.4 kw
• Blade size 11380mm x thickness 1.6 x width 65 mm
• Net weight 17.500 kgs

STK 1633

• 1045 Saw Capacities 1015mm x 450mm Capacity 18 metres infeed
• 18 metres outfeed
• Infeed and Outfeed Crosstransfers

STK 1632

• 603LBH Saw Capacities 610mm X 310mm
• 12 metres in Infeed and Outfeed Crosstransfers

STK 1642

• Cutting capacity round at 90 degree Ø 330 mm.Cutting capacity round at 90 degree: 460 X 250 mm
• Cutting capacity round 60 degree : Ø 205 mm Cutting capacity flat 60 degree : 205 X 250 mm Cutting capacity round 45 degree : Ø 305 mm Cutting capacity flat 45 degree : 305 X 250 mm  
• Cutting Speed : 40 / 80 m/min  Saw Band dimensions : 3960 X 27 X 0.9 mm  ( L X W X Thickness ) Cutting Angle : 45 degree / 60 degree / 90 degree

STK 1643

• Cutting Capacity at 0° 350 mm Diameter 570 x 260 mm Rectangle 350 mm Square
• Cutting Capacity at +45° 350 mm Diameter 460 x 180 mm Rectangle 350 mm Square

STK 1644

• For cutting insulated (sandwich) and wire netting panels
• 250mm x 1250mm Capacity

STK 1645

• Bomar Transverse 510.330 DGH
• Semi Automatic Horizontal Bandsaw
• Cutting capacity at 90° 345mm Diameter.510mm x 345mm Rectangle. 345mm Square     
• Cutting capacity at 45°R 345mm Diameter
• 400mm x100mm Rectangle. 330mm Square      
• Cutting capacity at 45°L 345mm Diameter 410mm x100mm Rectangle. 315mm Square     
• Cutting capacity at 60°R 260mm Diameter 260mm x 130mm Rectangle. 245mm Square      
• Cutting capacity at 60°L 260mm Diameter
• 280mm x 120mm Rectangle. 260mm Square

Voortman VSB 1500 CNC Shot Blaster - Year 2009

• 20 metres Infeed Rollers
• 20 metres outfeed Rollers
• Infeed and Outfeed Crosstransfers
• VACAM CNC Control

Voortman VSB 2500 CNC Shot Blaster - Year 2009

• VACAM CNC CONTROL
• No handling

STK 1646

• 12 metres In‐Feed
• 4 Punches
• Marking / Stamping facility. 500mm x 25mm Capacity
• VPO1000 Vertical punching machine with 4 tool punch station
• VNI 1/36 Hard Stamping Uni
• VPS 2200 Flat bar shear
• VHS 2400 Angle shear
• VACAM Software

STK 1647

• 6 metres In‐Feed
• 4 Punches. Marking / Stamping facility
• 500mm x 25mm Capacity

STK 1617

• 500mm Capacity Flat Bar
• 160mm x 160mm Angle
• 3 head Punch
• Horizontal punch. 
• 6 metres Gripper feed
• Mitre Shearing

STK 1648

• CAPACITY: Punch Tonnage Capacity 80 Tons Shear Tonnage Capacity 250 Tons
• Max. Angle Size 6" x 6" x 1/2" Min. Angle Size 1-1/2" x 1-1/2" x 1/8"
• Flat Maximum 6" x 5/8" Flat Minimum 2" x 1/4" Max. Flat Bar (Shear & Punch) 6" x 1/2"
• Channel C6-4" x 2" Throat 5-1/4" Stroke 1-3/4" Max. Hole Size 1-1/4"
• Material Feed Rate 150 FPM

STK 1649

• CAPACITY Maximum Angle 200 x 200 x 25mm Minimum Angle 40 x 40 x 4mm Maximum Flat Stock Capacity 300 x 25mm Minimum Flat Stock Capacity 50 x 6mm OR 75 x 5mm Acceptable Channel
• Sizes maximum 300mm wide maximum
• Number of Punches 3
• 153 Metric Tons

STK 1428

• 80 Ton Punching Capacity
• 25mm Maximum Plate Thickness
• 3 Station Tool Magazine
• 46mm Maximum Punch Diameter
• Drilling Unit
• 600mm Maximum Plate Width

STK 1626

• 6 Metres Plate Length
• 2.5 Metres Plate Width
• Small Parts Conveyor. Punching
• Drilling Head. Marking
• Hypertherm HPR 260 Plasma
• Oxy‐fuel Cutting

STK- TBC

• 6 Metres Plate Length
• 1.5 Metres Plate Width
• Small Parts Conveyor
• 3 x Drilling Head.
• Scribing
• Hypertherm HPR 260 Plasma
• Oxy‐fuel Cutting

STK 1650

• 40mm Drilling Capacity
• 6mm- 75mm Plate Thickness
• 8 Station Tool Changers
• Plate size minimum. mm 100 x 100
• Plate size maximum. mm 1000 x

STK 1628

• KINGSLAND 55DP Double ended Punch

STK 1627

• Capacities Angles 50mm x 50mm x 5mm
• Flat Bar 60mm x 10mm / 50mm x 12mm
• Box Section 60mm x 40mm x 3mm